HP P3005, M3527, M3585 Noise in Printer


If you have replaced the fuser in one of these printers and now there is a rough, vibrating noise from the rear of the printer, change out the gear kit [part #CB414-67923]. If that does not resolve the noise problem you’ll need to also change out the fuser drive assembly [part #RM1-3746].

By replacing the drive assembly, the gear kit and the fuser at the same time, it keeps all the gears at the same pitch, eliminating vibration and noise.
========================================================================================
This HP printer tip courtesy of Bill Raymond, a service technician here at Market Point.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s